(2024)
An experimental study on the fine particle emissions of brake pads according to different conditions assuming vehicle deceleration with pin-on-disc friction test.
APPLIED SCIENCES-BASEL.
14,
3
(2023)
Effect of magnetic field intensity on friction and wear of TiN- and TiCN-coated neodymium magnets.
WEAR.
523,
-
(2021)
Enhanced Frictional Properties of NiO-Based Nanocomposites with the Addition of GDC.
TRIBOLOGY LETTERS.
69,
2
(2021)
Investigation of the Effects of Uneven Plateau Grinding on Friction, Wear Rate, and Localized Surface Damage on Internal Combustion Engine Cylinder Liners.
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY.
22,
3
(2020)
Practical Evaluation of Ball Stud Plating Effects on the Increase of Free Gap of Ball Joints in the Vehicle.
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY.
21,
5
(2020)
Development of the Wear Resistant Ball Nut Assembly in the Rack-Based Electric Power Steering.
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY.
21,
3
(2020)
Oxide Layer Rumpling Control Technology for High Efficiency of Eco-Friendly Combined-Cycle Power Generation System.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY.
7,
1
(2019)
Design of Accelerated Life Test for Sleeve Bearing of Construction Equipment Based on Wear Prediction.
TRIBOLOGY TRANSACTIONS.
62,
3
(2018)
Wear Prediction of Earth-Moving Machinery Joint Bearing via Correlation between Wear Coefficient and Film Parameter: Experimental Study.
TRIBOLOGY TRANSACTIONS.
61,
5
(2018)
An Effective Electrical Resonance-Based Method to Detect Delamination in Thermal Barrier Coating.
JOURNAL OF THERMAL SPRAY TECHNOLOGY.
27,
3
(2018)
The effect of plateau honing on the friction and wear of cylinder liners.
WEAR.
400,
(2017)
Measurement of sliding friction coefficient of micro-line patterned surfaces on ice.
APPLIED PHYSICS LETTERS.
111,
21
(2017)
Analysis of Physical Friction Characteristics about Handwrite Feeling-Rough and Smooth.
JOURNAL OF FRICTION AND WEAR.
38,
6
(2017)
The Study on Delamination Life of TBC through Burner-Rig Test.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING.
18,
4
(2017)
TBC Delamination Life Prediction by Stress-Based Delamination Map.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY.
4,
1
(2016)
필기 감성에 관련한 마찰메커니즘 분석.
한국윤활학회지.
32,
6
(2016)
The relation between the tribological test results and tactile response.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY.
53,
3-4
(2016)
Friction, Wear, and Scuffing Characteristics of Marine Engine Lubricants with Nanodiamond Particles.
TRIBOLOGY TRANSACTIONS.
59,
6
(2015)
Effect of Lubricant with Nanodiamond Particles in Sliding Friction.
한국윤활학회지.
31,
4
(2015)
Development of a diesel cold performance evaluation method by use of design of experiment.
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY.
16,
5
Publications
(2002)
정역학.
시그마프레스.
Co-author
Conference Paper
(2019)
The unsatisfied effect of Plateau Honing on the friction and wear of cylinder liners.
STLE Tribology Frontiers conference.
UNITED STATES
(2018)
Friction characteristics on the real touch feeling of handwriting with the stylus pens.
73rd STLE annual mwwting.
UNITED STATES
(2018)
DC모터의 브러시, 정류자의 성분에 따른 마모 특성.
한국윤활학회 2018년도 제65회 춘계학술대회 논문집.
KOREA, REPUBLIC OF
(2018)
연필의 경도에 따른 마찰기인 진동 연구.
한국윤활학회 2018년도 제65회 춘계학술대회 논문집.
KOREA, REPUBLIC OF
(2017)
마모 입자에 따른 필기구들의 마찰특성.
한국윤활학회 64회 추계학술대회.
KOREA, REPUBLIC OF
(2017)
접촉면적과 하중이 연필의 마찰음에 미치는 영향.
한국윤활학회 64회 추계학술대회.
KOREA, REPUBLIC OF
(2017)
The effect of plareau honing on the friction and wear of cylinder liners.
21st International conference on Wear of materials.
UNITED STATES
(2017)
Analysis of friction mechanisms associated with write feeling.
4th International tribology symposium.
KOREA, REPUBLIC OF
(2017)
Feedback study and Tactile sensibility control estimation with tactile actuator using beat frequency.
4th International triblogy symposium.
KOREA, REPUBLIC OF
(2017)
A study of generation of noise accordance with variation of real contact area and surface roughness.
4th International triblogy symposium.
KOREA, REPUBLIC OF
(2016)
A research on the characteristic of friction and wear of ceramic coating with different magnetic intensity.
미국윤활학회학술대회.
UNITED STATES
(2016)
Analysis on the relation between wear and noise of vehicle headliner materials.
미국윤활학회학술대회.
UNITED STATES
(2016)
Tactile Feedback about various surfaces and governing factor discriminating touch sensibility.
미국윤활학회학술대회.
UNITED STATES
(2016)
Stick-slip 현상에 의한 마찰 소음에 관한 연구.
한국윤활학회춘계학술대회.
KOREA, REPUBLIC OF
(2016)
디스플레이 표면의 스타일러스 펜 필기감 향상을 위한 마찰 거동.
한국윤활학회춘계학술대회.
KOREA, REPUBLIC OF
(2016)
손가락 마찰에 따른 주파수 거동.
한국윤활학회춘계학술대회.
KOREA, REPUBLIC OF
(2015)
Methods of measuring the remaining lifetime and evaluating the thermal condition of TBC.
Mechanical Enginering and advanced materials 2015.
MALAYSIA
(2015)
The characteristics of the fretting wear on Inconel 738LC and CM247LC according to the roughness change.
Malaysian international tribology conference 2015.
MALAYSIA
(2015)
Tribological analysis of touch experience about various fabrics.
Mayaysian international tribology conference 2015.
MALAYSIA
(2015)
Estimation of tactile feedback from surface propertoes including tribological test.
2015 STLE tribology frontiers conference.
UNITED STATES